Configuring a DLINK switch(with screenshots)
Creating VLANS in D-LINK switch using Web interface For this guide we are going to use two VLANS. They are; Management VLAN VID = 99 VLAN name = Mgtvlan Floor VLAN VID = 140 VLAN name = Floor400 IP range = 192.168.140.0/24 Public VLAN VID = 50 VLAN name = PublicVL Reset the switch. Then change the IP address of the PC of the Ethernet adapter to an IP of range 10.90.90.0/24. (For this example we used 10.90.90.2) Connect the Ethernet cable to the port 1 of the switch. Open any web browser and type 10.90.90.90 and enter. The default login password is admin. Login using the password. Once logged in, there will be a window as below. Mark the Ignore the wizard next time check box and click exit. In the following window go to the System tab in the left panel of the window. In System , go to System settings and configure the System Information . For this example, we u